Button Layout

๐Ÿ“˜

This section applies to the 'MarkOne w/ Wifi' unit

1925

FEATURES
Connect Button: Press once to initiate manual connection to Wifi network, using credentials stored on MarkOne.
Connect on Start-up: Connect pins A0 and A1 to cause MarkOne to connect to Wifi at startup.
On/Off Control via D5 Pin: Pulling D5 to GND will turn off the IR LEDs. (HIGH is 3.3V)
On/Off Control over the Internet: See this section of the documentation to learn about on/off control over-the-internet.